Tips for Cleaning different Types of Flooring | Tycan Blog

Tips for Cleaning different Types of Flooring | Tycan Blog

It’s important to clean your floors regularly, especially if you have kids or pets in the home. Floors can accumulate dust and dirt over time, which can be a concern for people with allergies or asthma. You also want to keep your floors looking their best so that they’re not only sanitary but also attractive and inviting. So, here are few tips on cleaning different types of floors.

How To Clean Different Types Of Flooring?

Laminate Flooring

The first step in cleaning your laminate floors is preparing them for cleaning by sweeping or vacuuming any dirt or debris from the surface. Since many laminate floors have a textured finish that mimics natural wood grain, make sure you remove all traces of dirt and debris before using any cleaning products on these surfaces.

You can use a damp mop with water to clean laminate wood floors, but avoid using soap or detergents with harsh chemicals because they can damage the finish on your laminate wood floors over time if left on too long or applied too frequently. If you want something more powerful than just water and vinegar would be enough to remove any dirt particle.

Engineered Hardwood Flooring

Use a gentle mop with a microfiber head to wipe up any dust or dirt from the surface of the floor. If your engineered hardwood floor has been stained, avoid using abrasive cleaners or chemicals as they could damage the finish.

Keep in mind that any cleaners or chemicals used on your engineered hardwood floor can leave streaks or marks behind if not properly dried off. So be sure to allow enough time for any cleaner to dry before walking on it again.

If you need to use an upright vacuum cleaner for quick cleanups, make sure it has a HEPA filter (High Efficiency Particulate Air) which will trap allergens like dander and pet hair inside the vacuum bag instead of blowing them around into the air where they can be inhaled by humans or pets.

Vinyl Tile Flooring:

Sweep or vacuum your luxury vinyl tile floors often with a soft brush attachment. This will get rid of dirt and debris before they scratch the surface or cause discoloration.

Use an all-purpose cleaner on vinyl floors once a week or so to keep them looking bright and shiny. Simply spray the cleaner onto an old towel, wring out excess liquid, then wipe down each section of the floor carefully with the towel. Rinse with warm water after you’ve cleaned each section.

Blot up spills immediately with an absorbent paper towel or cloth saturated with water or all-purpose cleaner, not your bare hands! If you need more power than paper towels can offer, use a microfiber cloth instead (or both).

Wood Floors

Hardwood floors are beautiful, but they can be a pain to clean. To keep your hardwood floors looking their best, you have to give them some TLC.

Wipe up spills right away or use a damp paper towel to dab at the spill. If you let it sit on the floor, it will start to seep into the pores of the wood and stain it permanently.

Don’t use harsh chemicals on your wood floors because they could damage them over time. The best thing to use is water and vinegar — just make sure that if you’re going to mop with vinegar that you do it on an old rag first so that no splashes get onto your floor or furniture!

Shag Carpet

Vacuum once a week to keep dirt from collecting in the fibers. Use a brush attachment on your vacuum cleaner to remove any ground-in dirt, but don’t use it too often because it can damage the fibers.

Use a damp mop and warm water mixed with mild detergent to spot clean stains or spills. Rinse with clear water after cleaning each section.

Concrete Floor

Sweep or vacuum your concrete floors regularly to remove dirt and debris. Vacuum with a brush attachment to get into corners and along baseboards. Sweep often enough that you don’t have large piles of dust and dirt in corners and along baseboards.

Use a damp mop or sponge mop with a commercial carpet tile cleaner designed specifically for concrete floors, such as Concrete Magic, when necessary. Look for cleaners that contain bleach or other strong chemicals if you have stains that won’t come out with soap and water alone.

Conclusion

So now you know how to make the most of each type of flooring in terms of cleaning. Just follow these guides, and use the right tricks for each surface. You’ll be amazed at how clean your home can look with just a little extra effort!

On the other hand, if you are looking for professional that repair floor in Scarborough includes patching & resurfacing then feel free to get in touch!

Flooring Contractors Greater Toronto Area

Need Help?

Chat with us on WhatsApp

whatsapp icon